AODD pumps are usually regarded as trustworthy in critical applications owing to its simple design and maintenance issues.
This will aid the consumers in maintaining their AODD Pump and also ensuring quick, handy answers in times of demand.
Ø DO's of AODD pumps:
l Check Air supply pressure.
l Check suction piping to be certain that it is all connected and tight, all valves are available and ducting flooded suction, the finish of this pipe is below the liquid levels (take care not to use piping smaller than pump vent connections).
l Do depart the required working area around the pumping unit.
l Do use large, brief, and directly suction piping.
l Do Record pump model serial and no. And document for future reference.
l Do obtain, read, and keep maintenance instructions furnished with your own pump.
l Do inspect (ESADS) Air distribution valve if found pump is not cycling.
l Do set up elastic straps along with a pulsation dampener at the other hand to decrease the pulsation in flow, keep the suction line length and amount of fitting to a minimum.
l Do set up a pressure regulating valve to insist air supply pressure does not exceed recommended limits, please flush the pump after each use to keep the damage when it is used for liquid/ material that tends to settle out or out.
l In freezing temperatures, the pump must be completely drained between the applications in all scenarios. You can also Know the entire process of how Peristaltic Pump works by Antlia Engineering Works.
l When used for poisonous and aggressive fluids, then the pump must always be flushed clean before disassembly.
l When managing flammable liquids, pumps, piping, valves, containers have to be grounded, airborne contaminants and sound hazardous, do wear eye and ear protection.
Ø DON'T's of all AODD pumps:
l Don't run the pump at rates faster than shown in the catalog in accordance with the chosen model.
l Don't require a pump to develop pressure higher than those shown in the catalog for your own model.
l Do not run pumps at temperatures above and below limits displayed in the catalogue for your own pump.
l Do not stick fingers from the ports of the pump! Serious injury may result. Do not reduce the suction line diameter.
I got here much interesting stuff. The post is great! Thanks for sharing it! Self Priming Trash Pump
ReplyDelete